Ford F150 Forumz banner

1996 F-150 Fuel System

3422 Views 3 Replies 2 Participants Last post by  Mr Mac
I just changed two injectors on this truck. Started it up ran fine for five minutes while in park and then starts billowing white smoke from the exhaust. No water in the oil. Not losing oil or water. I am thinking about changing the fuel pressure regulator. Has anyone had a similar situation?
1 - 4 of 4 Posts
Normally white smoke is oil being burned. Leaky valve guides or rings will cause this condition and it will be a while before you see a depreciable drop in oil level on the dipstick.
Mr Mac,

Will a compression test tell me absolutly if I have a bad oil ring?
It could, but, I would also pop off the valve covers and take a close look at the valve stem seals as well.
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top